来源： 机场搭建: v2board分支版本安装，支持vless/Hysteria
原版的v2board面板是不支持vless和Hysteria的，这里的v2board是在原版基础上的修改版，此修改版可以在原版的基础上丝滑一键升级。
一、介绍
v2board分支版本及对应的配套后端项目地址：
二、安装v2board修改版
v2board修改版的安装步骤，跟原版安装过程一致，参考我前面写的原版安装教程： 机场搭建： 通过aaPanel安装v2board及完成后端对接。
- 新安装
如果是新安装的环境，执行：
复制
$$
git clone https://github.com/wyx2685/v2board.git
$$
克隆完项目，执行安装脚本：
复制
$$
sh init.sh
$$
- 从原版升级
丝滑升级：
复制
$$
git remote set-url origin https://github.com/wyx2685/v2board
git checkout master
./update.sh
$$
然后参考【机场搭建： 通过aaPanel安装v2board及完成后端对接】在aaPanel重启队列。
三、安装XrayR修改版
v2board对应的xrayR修改分支安装步骤如下：
复制
$$
wget -N https://raw.githubusercontent.com/wyx2685/XrayR-release/master/install.sh && bash install.sh
$$
很快安装完毕，接下来修改配置文件(前提是你在v2board添加好节点)，配置文件对应/etc/XrayR，执行命令XrayR config启动编辑配置文件，然后配置文件参考下方修改节点信息：
复制
$$
Log:
Level: warning # Log level: none, error, warning, info, debug
AccessPath: # /etc/XrayR/access.Log
ErrorPath: /etc/XrayR/error.log
DnsConfigPath: # /etc/XrayR/dns.json # Path to dns config, check https://xtls.github.io/config/dns.html for help
RouteConfigPath: /etc/XrayR/route.json # Path to route config, check https://xtls.github.io/config/routing.html for help
InboundConfigPath: # /etc/XrayR/custom_inbound.json # Path to custom inbound config, check https://xtls.github.io/config/inbound.html for help
OutboundConfigPath: /etc/XrayR/custom_outbound.json # Path to custom outbound config, check https://xtls.github.io/config/outbound.html for help
ConnectionConfig:
Handshake: 4 # Handshake time limit, Second
ConnIdle: 30 # Connection idle time limit, Second
UplinkOnly: 2 # Time limit when the connection downstream is closed, Second
DownlinkOnly: 4 # Time limit when the connection is closed after the uplink is closed, Second
BufferSize: 64 # The internal cache size of each connection, kB
Nodes:
- PanelType: "NewV2board" # Panel type: SSpanel, NewV2board, PMpanel, Proxypanel, V2RaySocks, GoV2Panel
ApiConfig:
ApiHost: "https://v2dance.xyz"
ApiKey: "v2dance_api_key"
NodeID: 1
NodeType: V2ray # Node type: V2ray, Shadowsocks, Trojan, Shadowsocks-Plugin
Timeout: 30 # Timeout for the api request
EnableVless: true # Enable Vless for V2ray Type
SpeedLimit: 0 # Mbps, Local settings will replace remote settings, 0 means disable
DeviceLimit: 0 # Local settings will replace remote settings, 0 means disable
RuleListPath: # /etc/XrayR/rulelist Path to local rulelist file
ControllerConfig:
ListenIP: 0.0.0.0 # IP address you want to listen
SendIP: 0.0.0.0 # IP address you want to send pacakage
UpdatePeriodic: 60 # Time to update the nodeinfo, how many sec.
DeviceOnlineMinTraffic: 100 # V2board面板设备数限制统计阈值，大于此流量时上报设备数在线，单位kB，不填则默认上报
EnableDNS: false # Use custom DNS config, Please ensure that you set the dns.json well
DNSType: AsIs # AsIs, UseIP, UseIPv4, UseIPv6, DNS strategy
EnableProxyProtocol: false # Only works for WebSocket and TCP
AutoSpeedLimitConfig:
Limit: 0 # Warned speed. Set to 0 to disable AutoSpeedLimit (mbps)
WarnTimes: 0 # After (WarnTimes) consecutive warnings, the user will be limited. Set to 0 to punish overspeed user immediately.
LimitSpeed: 0 # The speedlimit of a limited user (unit: mbps)
LimitDuration: 0 # How many minutes will the limiting last (unit: minute)
GlobalDeviceLimitConfig:
Enable: false # Enable the global device limit of a user
RedisAddr: 127.0.0.1:6379 # The redis server address
RedisPassword: YOUR PASSWORD # Redis password
RedisDB: 0 # Redis DB
Timeout: 5 # Timeout for redis request
Expiry: 60 # Expiry time (second)
EnableFallback: false # Only support for Trojan and Vless
FallBackConfigs: # Support multiple fallbacks
- SNI: # TLS SNI(Server Name Indication), Empty for any
Alpn: # Alpn, Empty for any
Path: # HTTP PATH, Empty for any
Dest: 80 # Required, Destination of fallback, check https://xtls.github.io/config/features/fallback.html for details.
ProxyProtocolVer: 0 # Send PROXY protocol version, 0 for disable
EnableREALITY: true # 是否开启 REALITY
DisableLocalREALITYConfig: false # 是否忽略本地 REALITY 配置
REALITYConfigs: # 本地 REALITY 配置
Show: true # Show REALITY debug
Dest: uk03.bjdouyin.com:443 # REALITY 目标地址
ProxyProtocolVer: 0 # Send PROXY protocol version, 0 for disable
ServerNames: # Required, list of available serverNames for the client, * wildcard is not supported at the moment.
- uk03.bjdouyin.com
PrivateKey: # 可不填
MinClientVer: # Optional, minimum version of Xray client, format is x.y.z.
MaxClientVer: # Optional, maximum version of Xray client, format is x.y.z.
MaxTimeDiff: 0 # Optional, maximum allowed time difference, unit is in milliseconds.
ShortIds: # 可不填
- "6ba85179e3033fc2"
CertConfig:
CertMode: none # Option about how to get certificate: none, file, http, tls, dns. Choose "none" will forcedly disable the tls config.
CertDomain: "node1.test.com" # Domain to cert
CertFile: /etc/XrayR/cert/node1.test.com.cert # Provided if the CertMode is file
KeyFile: /etc/XrayR/cert/node1.test.com.key
Provider: alidns # DNS cert provider, Get the full support list here: https://go-acme.github.io/lego/dns/
Email: test@me.com
DNSEnv: # DNS ENV option used by DNS provider
ALICLOUD_ACCESS_KEY: aaa
ALICLOUD_SECRET_KEY: bbb
$$
然后重启XrayR即可。
访问机场首页测试： https://v2dance.xyz/#/home 。
参考：